Still loading. This can take a moment on a slow connection.
Still loading. This can take a moment on a slow connection.
Change the sample rate and the sample resolution, and say how each changes the sound’s accuracy and its file size.
level, and the code that stores it
If the sample rate goes up from 8,000 Hz to 16,000 Hz, what happens to the file size? Predict it in the guide, or change a setting to see.
Sample 2 of 8 at 0.125 ms: the tone is 7 levels up, exactly level 7, stored as 111.
Stored 100 111 100 000 100 111 100 000 8 samples × 3 bits = 24 bits in this millisecond
sample rate × sample resolution × length of sample
≈ means rounded to 2 decimal places.
If the sample rate goes up from 8,000 Hz to 16,000 Hz, what happens to the file size?
Answer before you change anything: the lab makes the change once you have said.
Move the sample rate and the sample resolution, and watch the samples, the levels and the steps of the recording. Change the length of sample to see the file grow.
After you check a prediction, this says why.
Try what you found on the lesson’s 36 marked questions. Practise in Sound Representation
The tone is a pure 2,000 Hz sine wave, and the graph shows its first millisecond, so the sample rates are real ones: at 44,100 Hz there are 45 samples in the millisecond. Each sample is stored as a whole number of levels from 0 at the bottom, written in the sample resolution’s bits.
The file size is for one channel (mono), with no header and no compression, as the syllabus calculates it. A CD holds two channels, so twice the bits. The length of the recording is what the syllabus calls the length of track.
Beyond the syllabus The flat line at 4,000 Hz happens because this tone is sampled at exactly twice its frequency, so every sample falls where it crosses the middle. To capture a sound, the sample rate has to be more than twice its highest frequency (the Nyquist rate); below that, the samples can make a wave that is not in the sound at all, called aliasing.