Input and Output Devices · Cambridge syllabus 3.2 · Lesson 3 of 4
Output Devices
Output devices communicate information or produce a physical effect. LED and LCD screens display images, DLP and LCD projectors show them on a large surface, inkjet, laser and 3D printers produce hard copies or objects, speakers produce sound and actuators produce a physical action, usually movement.
By the end, you can
- Understand the operation and uses of LED and LCD screens.
- Understand the operation and uses of inkjet, laser and 3D printers.
- Understand the operation and uses of speakers.
- Understand the operation and uses of actuators.
- Understand the operation and uses of DLP and LCD projectors.
Common output devices
An output device converts data into a form a person can perceive, or into a physical action.
A screen displays an image as a grid of pixels. An LCD screen has a layer of liquid crystals that twist to let more or less light through, lit from behind; in an LED screen that backlight is made of LEDs, which use less power and give a brighter picture. A projector shows the image on a large surface such as a wall: a DLP projector uses millions of tiny mirrors on a chip, each tilting to reflect light towards the screen or away from it, while an LCD projector shines a bright light through small LCD panels.
A laser printer draws the page with a laser onto a charged drum, so that charged toner sticks only where the laser has been; the toner transfers to the paper and is fused on with heat. It is fast, quiet and cheap per page, which suits high volume. An inkjet sprays tiny droplets of liquid ink directly onto the paper, giving excellent photographic colour, and costs more per page. A 3D printer builds a solid object by depositing material layer upon layer from a model.
A speaker reverses what a microphone does: a digital-to-analogue converter turns the stored binary back into a varying electrical signal, which is amplified and moves a cone to make sound waves.
An actuator is an output device that turns a signal from a processor into a physical action. Usually the action is movement — a motor turning, a pump pushing water, a valve opening — but an actuator can also switch on a heater or sound a buzzer. It is the part of an automated system that acts on the world, and it is the usual answer when a question asks what a control system outputs.
Worth remembering
- An LCD screen is backlit; in an LED screen the backlight is LEDs.
- A DLP projector uses tiny tilting mirrors; an LCD projector shines light through LCD panels.
- Laser suits high volume; inkjet suits photographic quality in small runs.
- An actuator turns an output signal into a physical action, usually movement.
Worked example
A controller sends an output to a motor actuator to open a vent after processing sensor input.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
A motor actuator, because the required output is physical movement of the barrier.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.