Geometry and Measurement · Cambridge syllabus 4.2, 4.3 · Lesson 1 of 1
Geometrical Accuracy
Read instruments from a suitable zero point and view scales squarely. Use a protractor's scale that starts at the correct arm. Maintain a stated drawing scale and keep construction arcs when evidence of a compass method is required.
By the end, you can
- Use rulers, protractors and compasses accurately.
- Draw and interpret scale diagrams.
- Read measurements from diagrams carefully.
Instruments
Drawing and measuring accurately is examined in its own right. Aim for lengths within a millimetre and angles within a degree; points on a graph should be plotted, and values read, to within half of the smallest square on the grid.
Use a sharp pencil, because a thick line is wider than the tolerance allows. Measure from the correct mark on the ruler rather than the worn end, and read the scale square on to avoid parallax.
With a protractor, place the centre exactly on the vertex and the baseline along one arm, then read the scale that starts at zero on that arm — protractors carry two scales and reading the wrong one gives the supplement of the angle you wanted, which is the standard error.
For a construction, such as a triangle from three given sides, use a ruler and compasses only, and leave every arc showing. The arcs are the evidence that the construction was done rather than estimated, and erasing them loses the marks however good the finished drawing is.
For scale drawings, use a ruler for every straight edge, state the scale, convert carefully, and check that a measured length converts back to something sensible. Bearings are measured clockwise from a north line drawn at the point you are measuring from.
Worth remembering
- Aim for 1 mm and 1°, and use a sharp pencil.
- On a protractor, read the scale that starts at zero on your arm.
- Leave construction arcs visible: they are the working.
Worked example
At scale 1:200, a 6 m wall is drawn as 600/200=3 cm.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
350 cm = 3.5 m.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.