Perimeter and Area · Cambridge syllabus 5.2, 5.3, 5.5 · Lesson 2 of 3
Area
Area measures surface coverage. A triangle has area bh/2; a parallelogram bh; a trapezium (a+b)h/2 for parallel sides a,b. Heights must be perpendicular. For compound figures, add non-overlapping areas or subtract cut-outs.
By the end, you can
- Calculate areas of rectangles and squares.
- Calculate areas of triangles.
- Calculate areas of parallelograms.
- Calculate areas of trapezia.
- Split complex shapes into familiar parts.
- Find areas of composite figures.
- Calculate shaded regions.
Basic areas
Area is the space inside a shape, measured in square units. Only the triangle formula is printed on the formula list, so the others have to be learned.
Rectangle: length × width. Triangle: ½ × base × height. Parallelogram: base × height. Trapezium: ½(a + b) × h, where a and b are the parallel sides.
In every one of these, the height means the perpendicular height — measured at right angles to the base, not along a slanted side. Using the sloping side of a triangle instead of its vertical height is the most common error in this topic, and diagrams often give both numbers deliberately.
The units are squared: multiplying centimetres by centimetres gives cm². Check that both dimensions are in the same unit before multiplying.
- triangle area = ½ × base × perpendicular height
- The height is measured at right angles to the base, not along a slanted side.
- trapezium area = ½(a + b) × h
- The average of the two parallel sides, times the distance between them.
Worth remembering
- Always use the perpendicular height, never the sloping side.
- Rectangle lw, triangle ½bh, parallelogram bh, trapezium ½(a + b)h.
Compound areas
A compound shape is handled by splitting it into shapes whose areas you can find, working out each, and adding. Alternatively, find the area of a surrounding rectangle and subtract the pieces that are not part of the shape — sometimes much quicker.
Mark the split on the diagram and label the dimensions of each piece, filling in any that are not given from the ones that are. The working should make clear which piece each calculation belongs to.
For a shaded region, the usual approach is to find the whole and subtract the unshaded part: a circle inside a square gives a shaded area of square minus circle.
Keep every length in the same unit throughout, and give the final answer in the unit the question asked for.
Worth remembering
- Split into known shapes and add, or surround and subtract.
- For a shaded region, take the whole and subtract the rest.
Worked example
A trapezium with parallel sides 6 and 10 cm and height 4 cm has area (6+10) × 4/2 = 32 cm².
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
12 × 7/2 = 42 cm².
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.