Simple Phenomena of Magnetism · Cambridge syllabus 4.1 · Lesson 2 of 3
Permanent and Temporary Magnets
A permanent magnet retains substantial magnetism after the magnetising field is removed. Soft iron is useful for temporary magnets because it magnetises and demagnetises readily. Steel retains magnetism more readily.
By the end, you can
- Permanent magnets retain magnetism.
- Temporary magnets lose magnetism more easily.
- Compare magnetic materials.
- Describe induced magnetism.
Magnetisation
A permanent magnet keeps its magnetism once it has been magnetised. Steel is the usual choice, because it is magnetically hard: difficult to magnetise and, once magnetised, difficult to demagnetise. A temporary magnet is magnetic only while something is making it so. Soft iron is the usual choice here, because it is magnetically soft: easy to magnetise, and it loses almost all its magnetism the moment the cause is removed.
Which one you want depends on the job. A compass needle, a fridge magnet and a loudspeaker magnet need to stay magnetised, so they are made of steel or a similar material. An electromagnet core needs to lose its magnetism when the current stops, so it is soft iron — a steel core would stay magnetised and a scrapyard crane would not release its load.
A magnet does not need to touch a piece of iron or steel to magnetise it. Any unmagnetised magnetic material placed near a magnet, or touching it, becomes a magnet itself while it is there. This is induced magnetism. The end of the iron nearest the magnet’s north pole becomes a south pole, and its far end a north pole, so the iron is attracted. That is why a magnet attracts any magnetic material, and why a chain of paper clips can hang from one magnet: each clip is magnetised by the one above it and holds up the one below.
Induced magnetism shows the difference between the two materials clearly. Take the magnet away and a chain of soft iron nails falls apart at once, because soft iron loses its induced magnetism almost completely. A chain of steel pins stays together, weakly, because steel keeps some of its induced magnetism and has become a permanent magnet. Non-magnetic materials such as copper, aluminium and plastic cannot have magnetism induced in them at all.
Worth remembering
- Steel keeps its magnetism (permanent magnets). Soft iron loses it easily (temporary magnets).
- A magnet induces magnetism in nearby iron or steel, with the opposite pole nearest, so it attracts it.
- Removed from the magnet, soft iron loses its induced magnetism; steel keeps some.
Worked example
An electromagnet lifting scrap metal often uses a soft iron core so the load can be released when current is switched off.
Magnetise a material
Part of the full Physics course. This unit’s free simulation is Build a circuit.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
It becomes strongly magnetised in the field and loses magnetism readily when the field is removed.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.