Thermal Properties and Temperature · Cambridge syllabus 2.2 · Lesson 1 of 3
Thermal Expansion
Includes Supplement objectivesHeating usually increases average particle separation, causing expansion. Solids, liquids and gases expand by different amounts. Expansion gaps allow bridges and rails to change length without large stresses.
By the end, you can
- Explain expansion and contraction of solids.
- Describe engineering applications and problems.
- Explain expansion of liquids and gases.
- Apply thermal expansion to thermometers and practical systems.
- Explain, in terms of particles, why gases expand more than liquids and liquids more than solids. [Supplement]
Solids
Heating a solid makes its particles vibrate more strongly, so each one takes up slightly more room and the solid as a whole expands. Cooling reverses it. The change is small — a steel bridge might lengthen by a few centimetres over its whole span across a year — but the forces involved are enormous, and structures that ignore it crack.
So expansion is designed for. Bridges sit on roller bearings and have expansion joints, those toothed gaps you drive over at either end. Railway track is laid with small gaps, or welded and pre-stressed to cope. Overhead cables are strung with a deliberate sag so they do not snap when they contract on a cold night.
Different solids expand by different amounts for the same temperature rise, which can be put to use. A bimetallic strip is two metals bonded together; when heated, the one that expands more forces the strip to curve towards the other. That bending can open or close a circuit, which is how a simple thermostat or a fire alarm works.
Worth remembering
- Solids expand on heating because the particles vibrate more and take up more space.
- Expansion joints, roller bearings and cable sag exist to allow for it.
- A bimetallic strip bends because two metals expand by different amounts.
Liquids and gases
Liquids expand more than solids for the same temperature rise. This is the principle of the liquid-in-glass thermometer: the liquid in the bulb expands more than the glass around it and is pushed up a narrow tube, and the narrowness is what makes a small change in volume show as a large, readable change in length.
It is also why a full kettle or a full fuel tank can overflow as the contents warm, and why bottles of liquid are never filled quite to the top.
Gases expand most of all. A gas free to expand at constant pressure grows substantially when heated — which is what lifts a hot-air balloon: the air inside expands, some escapes, so the balloon contains less mass in the same volume and its average density falls below that of the surrounding air.
The order, gases most, then liquids, then solids least, comes from the motion and arrangement of the particles. In a solid, strong forces hold the particles close together in fixed positions, so extra vibration pushes them only very slightly further apart. In a liquid the particles are still close, but the forces holding them are weaker and the particles are free to move about, so the same temperature rise moves them apart rather more. In a gas the particles are already far apart with almost no forces between them, so when they move faster they spread out much further, as far as the surrounding pressure allows.
Worth remembering
- Expansion for the same temperature rise: gases most, then liquids, then solids.
- Weaker forces and freer particle movement mean more expansion for the same temperature rise.
- A liquid-in-glass thermometer turns a small volume change into a long, readable column.
Worked example
A liquid thermometer rises when its liquid expands more than the surrounding glass.
Leave room for expansion
Part of the full Physics course. This unit’s free simulation is Compress a gas.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
They provide room for thermal expansion and reduce buckling or damaging stress.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.