Transfer of Thermal Energy · Cambridge syllabus 2.3 · Lesson 1 of 4
Conduction
Includes Supplement objectivesIn conduction, energy spreads through interactions between neighbouring particles without bulk material flow. Metals also have mobile electrons that transfer energy efficiently. Insulators transfer energy more slowly.
By the end, you can
- Explain conduction using particle interactions. [Supplement]
- Distinguish good thermal conductors from insulators.
- Explain conduction in metals. [Supplement]
- Describe experiments to show which materials are good thermal conductors and which are bad thermal conductors (thermal insulators).
- Explain, in terms of particles, why thermal conduction is bad in gases and most liquids. [Supplement]
- Know that many solids conduct thermal energy better than insulators but less well than good conductors. [Supplement]
Thermal conduction
Conduction is the transfer of thermal energy through a material without the material itself moving. Heat one end of a metal rod and the other end warms, but the metal has not travelled anywhere. The energy always flows from the hotter part to the colder part. Cold is not something that flows: when a spoon feels cold, energy is flowing out of your hand.
There are two mechanisms. In any solid, the atoms or molecules at the hot end vibrate more strongly and, because they are held close to their neighbours, they pass some of that vibration along the lattice. This works, but slowly. In metals there is a second and far more effective route: free electrons, which are not bound to any one atom, gain kinetic energy at the hot end, travel quickly through the structure, and collide with particles further along, delivering energy as they go.
That second mechanism is why metals are much better thermal conductors than non-metals. Materials that conduct thermal energy badly, such as wood, plastic, wool and air, are called thermal insulators; they still conduct, only very slowly. A metal spoon in hot soup soon becomes too hot to hold while a wooden one does not, and a saucepan has a metal base to carry energy quickly into the food but a plastic or wooden handle that stays cool.
It is also why metals feel cold to the touch at room temperature: they are not colder than the wood beside them, but they conduct energy away from your hand far faster, and what you feel is that rate of loss.
Worth remembering
- Conduction: energy passes through a material without the material moving.
- In all solids vibrating atoms pass energy to their neighbours; metals also have fast free electrons.
- Metals are good thermal conductors; wood, plastic, wool and air are thermal insulators.
Testing conductors
You can compare thermal conductors with a simple experiment. Take rods of different materials, such as copper, aluminium, iron and glass, all the same length and thickness. Fix a drawing pin to each one with a small blob of wax, the same distance from one end, and heat those ends equally, for example by standing them in the same container of hot water. The better the conductor, the sooner its wax melts and its pin drops. Keep everything except the material the same, the length, the thickness, the position of the pin and the heating, so the test is fair. Copper drops its pin first; the glass rod may still hold its pin long after the metals have dropped theirs.
Another version wraps a strip of paper tightly round a rod that is half wood and half brass, and holds the join in a flame. The paper over the wood scorches, but the paper over the brass stays unmarked, because the brass conducts the energy away from the paper so quickly that it never gets hot enough to burn.
Liquids conduct badly, and gases worst of all. Heat the water near the top of a tilted test tube with ice weighted down at the bottom, and the water at the top boils while the ice hardly melts. The reason lies in the particles. In a liquid they are a little further apart than in a solid and are not held in a fixed lattice, so vibrations are passed on poorly; in a gas they are far apart and collide only occasionally, so energy is handed on very slowly. Neither has free electrons, which is why the exceptions are liquid metals such as mercury. Trapped air is the basis of most insulation: wool, foam, fibreglass and feathers are full of small pockets of air that conducts badly and, being trapped, cannot circulate.
Not every solid is either a good conductor or an insulator. Many sit in between: glass, brick, concrete and stone conduct thermal energy better than insulators such as air, wool and polystyrene, but far less well than metals. So glass is a poor conductor, yet a single pane of glass or a brick wall still lets a fair amount of energy out of a warm house, which is why double glazing traps a layer of air between two panes.
Worth remembering
- Compare conductors with equal rods carrying pins held on with wax: the best conductor drops its pin first.
- Liquids and gases conduct badly: no free electrons, and gas particles are far apart and collide rarely.
- Glass, brick and stone conduct better than insulators such as air, but much less well than metals.
Worked example
A metal spoon warms along its handle when one end is in hot water, although the metal itself does not flow.
Watch energy spread
Part of the full Physics course. This unit’s free simulation is Compress a gas.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Metal transfers energy efficiently to food; an insulating handle reduces energy transfer to the hand.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.