Sound · Cambridge syllabus 3.4 · Lesson 3 of 4
Pitch and Loudness
Pitch depends mainly on frequency; loudness depends on amplitude and perception. A larger-amplitude waveform represents stronger pressure variation. Changing frequency does not by itself determine loudness.
By the end, you can
- Relate pitch to frequency.
- Relate loudness to amplitude.
- Interpret sound wave diagrams.
Pitch
Pitch is how high or low a note sounds, and it is determined by frequency. A higher frequency gives a higher pitch: a tightened guitar string vibrates faster and sounds higher, and a short organ pipe sounds higher than a long one.
On an oscilloscope trace, a higher-pitched sound shows more waves squeezed into the same width of screen, because more cycles occur each second.
Human hearing covers roughly 20 Hz to 20 000 Hz, though the upper limit falls with age. Sound above 20 000 Hz is ultrasound, inaudible to us but audible to dogs and bats.
Worth remembering
- Pitch is determined by frequency: higher frequency, higher pitch.
- Human hearing: about 20 Hz to 20 000 Hz.
Loudness
Loudness is determined by amplitude. A larger amplitude means the source is vibrating further, so the wave carries more energy and the sound is louder. On an oscilloscope, a louder sound gives a taller trace.
The two properties are independent, and keeping them apart is what most questions here are testing. Turning up the volume increases the amplitude and leaves the frequency alone, so the note gets louder without changing pitch. Playing a higher note changes the frequency and can leave the amplitude alone, so the pitch rises without getting louder.
On an oscilloscope, then: height means loudness, and the number of waves across the screen means pitch. A trace that is taller and more tightly packed is both louder and higher.
Worth remembering
- Loudness is determined by amplitude: larger amplitude, louder sound.
- On an oscilloscope: taller trace = louder; more waves across the screen = higher pitch.
Worked example
Two notes of equal amplitude can have different pitches if their frequencies differ.
Make a wave
Change a value and watch the readings follow. Open it on the lab stage
Make a wave
A wave travels along the light rope at 2 m/s, with its crests 2 m apart.
- Wave speed
- 2 m/s
- Wavelength
- 2 m
- 2 m/s ÷ 1 Hz
- Period
- 1 s
- 1 ÷ 1 Hz
- Crest-to-trough height
- 1 m
- 2 × 0.5 m
Goal
Find out what sets the speed of a wave along a rope, and what changing the frequency does to its wavelength.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. Play the run to see it happen. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 2
- Follow the marked particle while a crest passes it. Does the particle travel along the rope with the wave?
- Raise the frequency on the light rope from 1 Hz to 2 Hz. What happens to the wavelength, and to the wave speed?, not yet
- Give a wave on the heavy rope a wavelength of 0.5 m., not yet
Source
v = fλ
2 m/s = 1 Hz × 2 m
Particle displacement / m
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
An ideal transverse wave on a rope long enough that nothing reflects from its far end, with no losses, so the amplitude never decays along it. Both ropes are under the same tension.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Its pitch rises; amplitude is unchanged.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.