Constructions and Scale Drawings · Cambridge syllabus 4.2, 4.3 · Lesson 1 of 2
Geometrical Constructions
Measure lengths with a ruler to the nearest millimetre and angles with a protractor to the nearest degree. To construct a triangle from three sides, draw one side, then draw an arc from each end with the other two lengths; the crossing is the third vertex. Use a ruler and compasses only, and leave the arcs showing.
By the end, you can
- Measure and draw lines and angles accurately with a ruler and a protractor.
- Construct a triangle given the lengths of all three sides, using a ruler and compasses only.
- Construct shapes made from triangles, such as a rhombus, leaving the construction arcs showing.
- Use ruler and compass accurately.
Basic constructions
Accurate drawing uses three instruments: a ruler for every straight line and for measuring lengths, a protractor for measuring and drawing angles, and a pair of compasses for arcs. Measure lengths to the nearest millimetre and angles to the nearest degree, and use a sharp pencil so the lines are thin.
To draw an angle with a protractor, put its centre on the vertex with the zero line along one arm, count round from zero to the angle you want, mark it, and join the mark to the vertex. Check whether the angle should be acute or obtuse before you read the scale, because a protractor has two scales and reading the wrong one gives 180° minus the angle.
To construct a triangle when you know all three sides, use a ruler and compasses only. For sides of 7 cm, 5 cm and 6 cm, draw the 7 cm side with a ruler and label its ends A and B. Open the compasses to 5 cm and draw an arc centred on A; open them to 6 cm and draw an arc centred on B. Where the arcs cross is the third vertex, C. Join it to A and B.
The construction arcs must be left showing, because they are the evidence of the method; rubbing them out loses the marks even if the triangle is right. The same method builds other shapes from triangles: a rhombus with sides of 5 cm is two triangles with a shared side, so draw the shared diagonal, then two pairs of 5 cm arcs, one pair on each side of it.
Worth remembering
- A ruler for every straight edge; measure to the nearest mm and the nearest degree.
- Triangle from three sides: draw one side, then an arc from each end with the other two lengths.
- Leave the construction arcs showing; they are the working.
Worked example
For sides 8 cm, 6 cm and 5 cm, draw AB = 8 cm, an arc of radius 6 cm from A and one of 5 cm from B; they cross at C.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
3 + 4 = 7 is less than 9, so the arcs from the ends of the 9 cm side never meet.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.