Constructions and Scale Drawings · Cambridge syllabus 4.2, 4.3 · Lesson 2 of 2
Scale Drawings and Bearings
A scale such as 1 : 50 000 means 1 cm on the map represents 50 000 cm on the ground; multiply to go from the map to real life, then convert units. Bearings are measured clockwise from north at the point you are starting from, written with three figures. The back bearing differs by 180°.
By the end, you can
- Draw and interpret scale drawings using a given scale.
- Convert between lengths on a scale drawing or map and real lengths, using scales such as 1 : 50 000.
- Measure and draw three-figure bearings, clockwise from north.
- Find the bearing of A from B when given the bearing of B from A.
- Use the compass directions north, east, south and west, as in "D is due east of C".
Scale drawings
A scale drawing is an accurate drawing of something real, made smaller or larger by a fixed scale. A scale of 1 cm to 2 m means each centimetre on the drawing stands for 2 metres. A 7 m wall is drawn 3.5 cm long, and a line measuring 4.6 cm on the drawing is 9.2 m in real life.
Map scales are usually written as a ratio, 1 : n, meaning 1 unit on the map is n of the same units on the ground. At 1 : 50 000, 1 cm on the map is 50 000 cm, which is 500 m or 0.5 km. To go from the map to real life, multiply by n and then convert the units; to go from real life to the map, convert to centimetres first and divide by n. So 3 km on a 1 : 50 000 map is 300 000 cm ÷ 50 000 = 6 cm.
In a scale drawing, lengths change but angles do not, so angles can be measured straight from the drawing. Questions often combine scale with bearings: draw a route to scale, then measure the distance and the bearing between its ends.
Use a ruler for every straight edge, and give measured answers to a sensible accuracy, usually to the nearest millimetre on the drawing before converting.
Worth remembering
- Scale 1 : n: multiply map lengths by n, then convert the units.
- 1 : 50 000 means 1 cm represents 50 000 cm = 0.5 km.
- Angles are the same on a scale drawing as in real life.
Bearings
A bearing gives a direction as an angle measured clockwise from north, written with three figures. East is 090°, south is 180° and west is 270°, and a direction just east of north, 8° round, is written 008°. Bearings run from 000° up to 360°.
The bearing of B from A is measured at A. Draw a north line at A, then measure clockwise from it round to the line AB. The word after "from" tells you where to stand, which is the part most often got wrong.
The bearing of A from B, called the back bearing, points the opposite way. Add 180° to the bearing of B from A if it is less than 180°, and subtract 180° if it is more. If the bearing of B from A is 025°, the bearing of A from B is 205°; if it is 300°, the back bearing is 120°. The two north lines are parallel, so this is the co-interior angle fact in disguise.
Compass directions are used in descriptions: "D is due east of C" means D is on the bearing 090° from C, and "due south" is 180°. Bearings questions often finish with trigonometry, finding how far north or east one place is from another.
Worth remembering
- Bearings are measured clockwise from north, with three figures.
- The bearing of B from A is measured at A.
- Back bearing: add 180° if under 180°, subtract 180° if over.
Worked example
The bearing of B from A is 070°, so the bearing of A from B is 070° + 180° = 250°.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
4.5 × 200 000 = 900 000 cm = 9 km.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.