Electrical Safety · Cambridge syllabus 4.4 · Lesson 1 of 4
Electrical Hazards
Current through the body can cause injury. Damaged insulation can expose live conductors, and excessive current can overheat wires. A short circuit offers an unintended low-resistance path and can produce a large current.
By the end, you can
- Electric shock.
- Damaged insulation.
- Overheating.
- Short circuits.
- Excessive current.
- Moisture and electrical safety.
Hazards
Mains electricity in most countries is around 230 V, which is easily enough to drive a lethal current through a person. The hazards to recognise are damaged insulation, which exposes live wire; overheated cables, which can start a fire; damp conditions, because water conducts and greatly lowers the resistance of skin; and overloaded sockets, where too many appliances on one adapter draw a current the wiring was not designed for.
A long cable coiled on a drum is a less obvious hazard: the coil cannot lose heat to the air, so a current that would be safe when the cable is unwound can overheat it.
Behind most of these is one fact: a current heats the wire it flows through, and a larger current heats it far more. Doubling the current makes the heating much more than twice as great. That is why overloading is dangerous out of proportion to how overloaded it appears, and why a cable rated for a given current must not be pushed past it.
The sensible precautions follow: check insulation and replace damaged cables, do not overload sockets or adapters, keep electrical equipment away from water, unwind extension cables fully, and switch off and unplug before working on anything.
Worth remembering
- Hazards: damaged insulation, overheated or coiled cables, damp conditions, overloaded sockets.
- A current heats a cable, and a larger current heats it far more: never exceed a cable’s rated current.
Worked example
An overloaded extension lead may carry more current than its wiring can safely handle.
Wire a plug, then break it
Part of the full Physics course. This unit’s free simulation is Build a circuit.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Low resistance allows a very large current, increasing heating in the wiring.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.