Electromagnetic Effects · Cambridge syllabus 4.5 · Lesson 1 of 6
Magnetic Effect of Current
Includes Supplement objectivesCurrent produces a magnetic field around a wire. The right-hand grip rule gives its direction: thumb along conventional current, curled fingers along the field. A coil combines the fields of many turns.
By the end, you can
- Describe magnetic fields around wires.
- Use the right-hand rule where appropriate.
- Explain magnetic fields around coils.
- Explain how electromagnets work.
- Describe an experiment to identify the pattern and direction of the magnetic field around a straight wire and around a solenoid.
- Describe how a relay uses the magnetic effect of a current, with examples of its use.
- Describe how a loudspeaker uses the magnetic effect of a current.
- Describe how the strength of the field varies around wires and solenoids, and the effect of changing the size and the direction of the current. [Supplement]
Current-carrying conductors
A current in a wire produces a magnetic field around it. The field lines form concentric circles centred on the wire, lying in planes perpendicular to it. The field does not point along the current; it circles round it.
Their direction is found with the right-hand grip rule: point the thumb of your right hand along the conventional current and your curled fingers give the direction of the field lines. Reverse the current and the field reverses with it.
Worth remembering
- A current produces circular magnetic field lines around the wire.
- Right-hand grip rule: thumb along the current, fingers curl in the field direction.
Solenoids
Winding the wire into a coil concentrates the field. Inside a solenoid the circular fields of the individual turns reinforce one another, producing a strong, nearly uniform field along the axis, while outside the field spreads out exactly like that of a bar magnet.
The ends behave as magnetic poles. Which is north follows from the right-hand grip rule applied to the coil: curl the fingers of the right hand in the direction of the current around the turns, and the thumb points out of the north end.
The field strength is increased by more current, more turns per unit length, or a soft iron core. This is the basis of the electromagnet, and of relays, bells and loudspeakers.
Worth remembering
- A solenoid produces a uniform field inside and a bar-magnet field outside.
- More current, more turns, or a soft iron core all strengthen it.
Experiments, relays and loudspeakers
To find the field around a straight wire, pass a long straight wire vertically through a hole in a horizontal sheet of card and connect it through a switch to a low-voltage supply that can give a large current. Sprinkle iron filings on the card, switch on and tap the card gently: the filings settle into circles centred on the wire. Then stand several small plotting compasses on the card around the wire: the needles line up along the circles, and the way their north ends point gives the direction of the field. Switch on only briefly, because the large current heats the wire. For a solenoid, thread the coil through holes in the card so that the card runs along the middle of the coil: the filings form straight, parallel lines inside and curves looping round outside, and compasses show the lines leaving the north end and entering the south end.
The same experiments show how the field strength varies. Round a straight wire the field is strongest close to the wire and gets weaker further away, so the circles are drawn further apart. A solenoid’s field is strong and nearly uniform inside, and weaker outside, getting weaker with distance from the coil. A larger current makes the field stronger everywhere. Reversing the current reverses the field: every compass needle turns round, and the solenoid’s north and south ends swap, while the pattern stays the same.
A relay is a switch worked by an electromagnet. A small current in the relay’s coil magnetises its soft iron core, which attracts a pivoted soft iron armature; the armature moves and pushes a pair of contacts together, completing a second, separate circuit. When the small current stops, the core loses its magnetism, a spring pulls the armature back and the contacts open. A relay lets a small, safe current switch a large or dangerous one, with the two circuits kept apart: a car’s ignition key switches the huge current to the starter motor through a relay, and a low-voltage thermostat or light sensor can switch on a mains heater, pump or street lamp.
A loudspeaker turns an alternating current into sound. A light coil of wire, attached to a paper or plastic cone, sits in the strong field of a permanent magnet. The alternating current from an amplifier flows through the coil and makes it an electromagnet whose field keeps reversing. The coil’s field interacts with the magnet’s field, so the coil is pushed one way when the current flows one way and pulled back when it reverses. The coil and cone vibrate at the frequency of the current, pushing on the air to make a sound wave; a larger current gives larger vibrations and a louder sound.
Worth remembering
- Iron filings show the field pattern; plotting compasses also show its direction.
- The field is stronger nearer the wire and with more current; reversing the current reverses it.
- A relay uses a small current in an electromagnet to switch a separate, larger current.
- A loudspeaker coil in a magnet’s field vibrates with the alternating current, moving a cone.
Worked example
Reversing current through a straight wire reverses the circular field direction.
Probe a magnetic field
Part of the full Physics course. This unit’s free simulation is Build a circuit.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Its magnetic field reverses and the north and south poles interchange.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.