Physical Quantities and Measurement Techniques · Cambridge syllabus 1.1 · Lesson 1 of 4
Physical Quantities and SI Units
Includes Supplement objectivesA measurement combines a number with a unit: 2.4 m specifies a length, whereas 2.4 alone does not. Derived units follow from equations: dividing metres by seconds gives m/s. Convert prefixes before substituting into an equation.
By the end, you can
- Understand that physics describes measurable physical quantities.
- Distinguish between a physical quantity, a numerical value and a unit.
- Use standard SI units.
- Length — metre (m)
- Mass — kilogram (kg)
- Time — second (s)
- Temperature — kelvin (K)
- Electric current — ampere (A)
- Derived quantities such as speed, density, force, pressure and energy.
- Use the prefixes mega (M), kilo (k), centi (c) and milli (m).
- Use the prefixes giga (G), micro (µ) and nano (n). [Supplement]
Physical quantities
Physics is the study of things that can be measured. That sounds like a small claim, but it is the whole method: if a statement cannot be turned into a measurement, physics has nothing to say about it. "The trolley is fast" is an opinion. "The trolley travels 2.4 metres every second" is a physical quantity, and two people in different rooms can check it and agree.
Every physical quantity has two parts, and both are compulsory. There is a number, which says how many, and there is a unit, which says how many of what. Write 2.4 on its own and you have said nothing: 2.4 metres, 2.4 seconds and 2.4 kilograms are three unrelated statements. Marks are lost in every exam session for answers that give the number and drop the unit, and the loss is fair — the number alone does not mean anything.
The unit is also what makes an answer checkable. If you rearrange an equation and end up with an answer in kilograms when the question asked for a speed, you have made an algebra mistake, and the units told you before you checked anything else.
Worth remembering
- A physical quantity = a numerical value × a unit. Both parts are required.
- Units are not decoration: they carry meaning and they catch mistakes.
Common SI quantities
Scientists worldwide agree on one set of base units, the SI system, so that a measurement made in one laboratory means the same in another. Five of them are used in this course: the metre (m) for length, the kilogram (kg) for mass, the second (s) for time, the kelvin (K) for temperature, and the ampere (A) for electric current.
Everything else is built from those by multiplying and dividing, and such units are called derived. Speed is a length divided by a time, so its unit is metres per second, m/s. Density is a mass divided by a volume, so kg/m³. Force is measured in newtons, but a newton is only a shorthand: 1 N = 1 kg m/s². Energy in joules is a force times a distance, 1 J = 1 N m.
Pressure is a force divided by an area, so its unit is the newton per square metre, N/m². When the area is small it is often given in newtons per square centimetre, N/cm², instead. The newton per square metre also has a name of its own, the pascal: 1 Pa = 1 N/m².
The rule that saves marks is to convert every quantity into base SI units before substituting into an equation, every time, not after. A length in centimetres and a time in seconds will give a speed in cm/s, which is not what the question asked for.
Worth remembering
- Base units: metre (m), kilogram (kg), second (s), kelvin (K), ampere (A).
- Derived units come from equations: m/s, kg/m³, N = kg m/s², N/m², J = N m.
- Pressure: N/m² or N/cm². 1 Pa = 1 N/m².
- Convert to base units before substituting, not afterwards.
Prefixes
A prefix in front of a unit multiplies it by a power of ten, so that very large and very small quantities can be written without a long string of zeros. Four prefixes come up constantly: mega (M) means × 1 000 000 (10⁶), kilo (k) means × 1000 (10³), centi (c) means ÷ 100 (10⁻²) and milli (m) means ÷ 1000 (10⁻³). So a 2 MW wind turbine has a power of 2 000 000 W, a 3.5 km run is 3500 m, a 45 cm ruler is 0.45 m long, and a 250 mA current is 0.25 A.
Three more prefixes cover the extremes. Giga (G) means × 1 000 000 000 (10⁹), micro (µ) means ÷ 1 000 000 (10⁻⁶) and nano (n) means ÷ 1 000 000 000 (10⁻⁹). A power station might transfer 5 GJ of energy in a few seconds, a light gate can time an interval of 50 µs, and green light has a wavelength of about 500 nm, which is 0.000 000 5 m.
To convert into the base unit, replace the prefix by the number it stands for and multiply. 6.2 kN is 6.2 × 1000 = 6200 N; 80 ms is 80 ÷ 1000 = 0.080 s; 3 µs is 3 ÷ 1 000 000 = 0.000 003 s. Going the other way, divide: 4 500 000 W is 4.5 MW. Take care that the letter m does two jobs. On its own, m is the metre, but in front of another unit it is milli, so 5 mm is five millimetres and 5 ms is five milliseconds.
Worth remembering
- M = × 10⁶, k = × 10³, c = × 10⁻², m = × 10⁻³.
- G = × 10⁹, µ = × 10⁻⁶, n = × 10⁻⁹.
- Replace the prefix by its power of ten before substituting into an equation.
Worked example
A 250 cm track is 2.50 m. A trolley taking 5.0 s has average speed 2.50 ÷ 5.0 = 0.50 m/s.
Read the scale
Change a value and watch the readings follow. Open it on the lab stage
Read the scale
Eye level: the line of sight meets the scale where the object ends, at 7.8 cm.
- Apparent reading
- 7.8 cm
- 7.8 cm + 0 cm
- Measured length
- 6.6 cm
- 7.8 cm − 1.2 cm
- Reading error
- 0 cm
- 7.8 cm − 7.8 cm
Goal
Measure an object that does not start at zero, and find out what looking at the scale from an angle does to the reading.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 2
- Line the object up with the 2 cm mark and measure it at eye level: subtract the start reading from the end reading., not yet
- Move your eye until the reading is at least 0.2 cm too high., not yet
- Convert the measured length to metres, then check your answer in the equation under the stage.
length = end reading − start reading
7.8 cm − 1.2 cm = 6.6 cm = 0.066 m
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
The object sits 0.4 cm above the scale, which exaggerates parallax. Its left end is lined up with the start mark by eye, straight on, so only the end is read at the viewing angle. A positive angle puts the eye to the left.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
0.035 × 1000 = 35 m; 35 × 100 = 3500 cm.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.