Pressure · Cambridge syllabus 1.8 · Lesson 2 of 2
Pressure in Liquids
Includes Supplement objectivesLiquid pressure increases with depth because more liquid is supported above the point, and it is greater in a denser liquid. The change in pressure is Δp = ρgΔh. At the same depth in a stationary connected liquid, pressure is the same.
By the end, you can
- Explain how liquid pressure changes with depth and with the density of the liquid.
- Use Δp = ρgΔh for the change in pressure beneath the surface of a liquid. [Supplement]
- Apply pressure ideas to dams and submerged objects.
Liquid pressure
Pressure in a liquid increases with depth, because at any point the liquid is supporting the weight of everything above it. Go deeper and there is more liquid above you, so the pressure is higher. This is why a dam is built thicker at the bottom than at the top, why water spurts furthest from the lowest hole in a leaking can, and why deep-sea submersibles need such strong hulls.
Pressure beneath the surface also depends on the density of the liquid. A denser liquid has more mass, and so more weight, in each cubic metre above a given point, so at the same depth it gives a greater pressure. A diver 10 m down in sea water, which is slightly denser than fresh water, feels a slightly greater pressure than one 10 m down in a lake, and the pressure 10 cm down in mercury is more than thirteen times that 10 cm down in water.
The change in pressure as you go down into a liquid is Δp = ρgΔh, where ρ is the density, g the gravitational field strength and Δh the change in depth. At 2.0 m down in water, with ρ = 1000 kg/m³ and g = 9.8 N/kg, the pressure is greater than at the surface by 1000 × 9.8 × 2.0 = 19 600 Pa. Going from 2.0 m to 5.0 m down, Δh = 3.0 m, so the pressure rises by a further 1000 × 9.8 × 3.0 = 29 400 Pa.
Liquid pressure depends only on depth and density, not on the shape or width of the container — the pressure at the bottom of a narrow tube and a wide tank of the same depth is the same. And at any depth the liquid pushes on every surface it touches, sideways on the walls of a tank or a dam and on all sides of a submerged object, not just downwards. A submarine’s hull and a dam wall are designed for the pressure at their deepest point, where it is greatest.
- Δp = ρgΔh
- The change in pressure beneath the surface of a liquid for a change in depth.Δp in Pa, ρ in kg/m³, g in N/kg (9.8), Δh in m
Worth remembering
- Liquid pressure increases with depth and with the density of the liquid.
- Δp = ρgΔh, with g = 9.8 N/kg.
- Depends on depth and density only, not on the shape of the container.
- Dams and submarine hulls must be strongest where they are deepest.
Worked example
At 2 m depth in water with ρ = 1000 kg/m³ and g = 9.8 N/kg, the pressure is 1000 × 9.8 × 2 = 19 600 Pa greater than at the surface.
Move a pressure probe
Change a value and watch the readings follow. Open it on the lab stage
Move a pressure probe
2 m down, the liquid above the probe adds 19,600 Pa.
- Pressure due to the liquid
- 19,600 Pa
- 1,000 kg/m³ × 9.8 N/kg × 2 m
Goal
Find how the depth of a probe and the density of the liquid decide the pressure it measures.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 3
- Take the probe to 4 m in water, then change the liquid to 1500 kg/m³. Compare the pressures., not yet
- Find the depth in water where the pressure is 49,000 Pa., not yet
- Find a liquid in which 2 m gives the same pressure as 1 m of water., not yet
pressure = density × g × depth
1,000 kg/m³ × 9.8 N/kg × 2 m = 19,600 Pa
Pressure due to the liquid / Pa
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
g = 9.8 N/kg. The pressure of the air on the surface is left out, so the reading is the pressure due to the liquid alone.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Δp = 1000 × 9.8 × 0.5 = 4900 Pa.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.