Pressure · Cambridge syllabus 1.8 · Lesson 1 of 2
Pressure in Solids
Includes Supplement objectivesPressure is force divided by contact area: p = F/A, in N/m² or N/cm². The same force on a smaller area, or a bigger force on the same area, creates greater pressure. Convert area units carefully: 1 cm² = 10⁻⁴ m², so 1 N/cm² = 10 000 N/m².
By the end, you can
- Understand pressure as force per unit area.
- Use pressure = force / area.
- Explain why changing contact area changes pressure.
- Work with pressure in N/m² and N/cm².
- Use the pascal (Pa) as the unit of pressure, where 1 Pa = 1 N/m². [Supplement]
Pressure
Pressure is the force acting on each unit of area: p = F ÷ A. With the force in newtons and the area in square metres, the pressure comes out in newtons per square metre, N/m². If the area is in square centimetres, the pressure comes out in newtons per square centimetre, N/cm². The newton per square metre is also called the pascal: 1 Pa = 1 N/m².
The same force gives a completely different pressure depending on the area it acts over. That is why a drawing pin works: you push with a few newtons, but the point has a tiny area, so the pressure under it is enormous and it sinks into the board. The head is broad for the opposite reason — a large area under your thumb keeps the pressure low enough to be comfortable. Skis, snowshoes and tractor tyres all spread weight over a large area to keep pressure low; knife edges, nails and studs concentrate it.
Pressure also depends on the force. On the same area, a bigger force gives a bigger pressure: pressing harder on the drawing pin pushes it in further, and a loaded lorry presses harder on the road than an empty one with the same tyres. A 600 N person standing on 0.03 m² of shoe sole exerts 600 ÷ 0.03 = 20 000 N/m². Standing on one foot halves the area and doubles the pressure, to 40 000 N/m², without changing their weight at all; picking up a 150 N bag while still on two feet raises the force to 750 N and the pressure to 25 000 N/m².
Watch the area units. 1 m² = 100 cm × 100 cm = 10 000 cm², so 1 cm² = 10⁻⁴ m², not 10⁻² m². It follows that 1 N/cm² = 10 000 N/m². The person above stands on 0.03 m² = 300 cm², so their pressure is also 600 ÷ 300 = 2 N/cm², and 2 × 10 000 = 20 000 N/m², the same answer. Getting the area conversion wrong is the usual source of answers out by a factor of ten thousand.
- p = F ÷ A
- Pressure is the force spread over the contact area.p in N/m² (or N/cm² with A in cm²), F in N, A in m²
Worth remembering
- p = F ÷ A, in N/m² or N/cm². 1 N/m² = 1 Pa.
- Same force, smaller area → greater pressure. Same area, bigger force → greater pressure.
- 1 cm² = 10⁻⁴ m², so 1 N/cm² = 10 000 N/m².
Worked example
A 100 N force over 0.02 m² gives 5000 N/m², which is 0.5 N/cm².
Spread the same force
Change a value and watch the readings follow. Open it on the lab stage
Spread the same force
100 N over 200 cm² presses with 5,000 Pa.
- Pressure
- 5,000 Pa
- 100 N ÷ 0.02 m²
- Contact area
- 0.02 m²
- 200 cm² ÷ 10,000
Goal
Find how the same force can press gently or sharply, depending on the area it is spread over.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 3
- Keep 100 N and spread it over 1000 cm², like a snowshoe. Did the pressure rise or fall?, not yet
- Press the same 100 N through 10 cm², like a stiletto heel. How many times bigger is the pressure?, not yet
- Find a force and an area that give exactly 10,000 Pa., not yet
pressure = force ÷ area
100 N ÷ 0.02 m² = 5,000 Pa
Pressure / Pa
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
Uniform normal force spread across a flat, square contact area. The foam squashes in proportion to the pressure until 20,000 Pa, when it is pressed flat.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
p = 600/0.03 = 20 000 N/m² (20 000 Pa).
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.