Motion · Cambridge syllabus 1.2 · Lesson 1 of 4
Distance, Displacement, Speed and Velocity
Includes Supplement objectivesDistance counts the entire path travelled. Average speed is total distance divided by total time, with every stage and stop included. Velocity is speed in a given direction, so it changes when the direction changes.
By the end, you can
- Understand distance as the total length of the path travelled.
- Know that distance is a scalar: it has size but no direction. [Supplement]
- Define speed as distance travelled per unit time.
- Use speed = distance ÷ time, and average speed = total distance travelled ÷ total time taken.
- Convert between units such as m/s and km/h.
- Define velocity as speed in a specified direction.
- Distinguish speed from velocity.
Distance and displacement
Distance is how far you actually travelled: the total length of the path, with every bend and every backtrack counted in. Walk 30 m east and then 10 m back west, and the distance you have travelled is 30 + 10 = 40 m. It does not matter that you finished only 20 m from where you started; you walked 40 m, and your legs know it.
Run one full lap of a 400 m track and you have covered a distance of 400 m, even though you are standing exactly where you began. Distance keeps adding up for as long as you keep moving, so it can only grow or stay the same; it never goes down and it is never negative. The syllabus works with distance, speed and velocity rather than with displacement, so distance is the quantity to use in every calculation in this course.
Distance is a scalar: it has a size but no direction. "40 m" is a complete answer, and adding "east" would not make it a different distance. Speed, built from distance, is a scalar too. That is the difference from velocity, which comes later in this lesson and does carry a direction.
Worth remembering
- Distance = the total length of the path travelled, every part of it counted.
- Distance only grows as you move; finishing where you started does not cancel it.
- Distance is a scalar: size but no direction.
Speed
Speed is how much distance is covered in each unit of time: speed = distance ÷ time. Its SI unit is metres per second, and the unit is really just the equation written out — metres divided by seconds.
Almost every speed you meet in a question is an average speed, taken over the whole journey: average speed = total distance travelled ÷ total time taken. A car that covers 120 km in 2 hours has an average speed of 60 km/h even though it certainly did not sit at 60 km/h the whole way. The speed at one instant, called the instantaneous speed, is what a speedometer shows.
For a journey in stages, add up all the distances and all the times first, and divide once. A cyclist rides 6 km in 0.5 h, stops at a café for 0.25 h, then rides 9 km in 0.75 h. The total distance is 15 km and the total time is 0.5 + 0.25 + 0.75 = 1.5 h, so the average speed is 15 ÷ 1.5 = 10 km/h. The stop counts, because it is part of the total time. Leaving it out gives 15 ÷ 1.25 = 12 km/h, which is how fast the cyclist rode, not the average speed for the journey.
Converting between km/h and m/s comes up constantly. One kilometre is 1000 m and one hour is 3600 s, so to go from km/h to m/s you divide by 3.6, and to go the other way you multiply by 3.6. A useful check: 36 km/h is 10 m/s, so motorway speeds in m/s are around 25–30, and walking pace is a little over 1.
- speed = distance ÷ time
- How much distance is covered each second.distance in m, time in s, speed in m/s
- average speed = total distance travelled ÷ total time taken
- The speed averaged over a whole journey, including any stops.
Worth remembering
- speed = distance ÷ time. Rearranged: distance = speed × time, time = distance ÷ speed.
- Average speed = total distance ÷ total time, with every stage and stop included.
- km/h → m/s: divide by 3.6. m/s → km/h: multiply by 3.6.
Velocity
Velocity is speed in a given direction. Saying a car has a velocity of 30 m/s is incomplete; 30 m/s north is a velocity. The speed tells you how fast, and the direction tells you which way, and both are part of the velocity.
Two cars on the same road, one doing 25 m/s northbound and the other 25 m/s southbound, have the same speed but different velocities. Along a straight line it is often easiest to show the direction with a sign: call one direction positive, and a velocity of −25 m/s is 25 m/s the other way.
Because velocity carries a direction, it can change without the speed changing at all. A car going round a roundabout at a steady 20 km/h has a constant speed and a continuously changing velocity, because the direction it is travelling in keeps changing. This matters more than it first appears: changing a velocity needs a force, so a force is needed to turn the car even though its speed stays the same.
Worth remembering
- Velocity = speed in a given direction.
- Same speed in different directions = different velocities.
- Changing direction changes velocity even at constant speed.
Worked example
Walk 30 m east and 10 m west in 20 s: distance = 40 m and average speed = 40 ÷ 20 = 2 m/s.
Distance versus displacement
Change a value and watch the readings follow. Open it on the lab stage
Distance versus displacement
At the start: nothing travelled yet.
- Distance
- 0 m
- 0 m + 0 m
- Displacement
- 0 m
- 0 m − 0 m
- Average speed for the trip
- 4 m/s
- (30 m + 10 m) ÷ 10 s
- Average velocity for the trip
- 2 m/s
- (30 m − 10 m) ÷ 10 s
Goal
Walk out and back, and compare how far you travel with how far you end up from the start.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. Play the run to see it happen. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 2
- Plan a walk that ends back at the start. Compare its distance with its displacement., not yet
- Double the average speed, but still finish 20 m east of the start., not yet
- Pause on the way back and compare the distance travelled with the length of the displacement arrow.
average speed = distance ÷ time; average velocity = displacement ÷ time
(30 m + 10 m) ÷ 10 s = 4 m/s; (30 m − 10 m) ÷ 10 s = 2 m/s east
Distance / m
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
Two straight legs completed in 10 s; speeds are constant within each 5 s leg. East is positive, so a negative displacement is west of the start.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Average speed = 400 ÷ 80 = 5 m/s. The velocity is not constant, because the direction changes round the bends.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.