Motion · Cambridge syllabus 1.2 · Lesson 3 of 4
Speed–Time Graphs
Includes Supplement objectivesThe gradient of a speed–time graph gives acceleration when direction remains unchanged. Its area gives distance. Split a complicated area into rectangles and triangles, then add them. Deceleration is a reduction in speed.
By the end, you can
- Identify acceleration, constant speed and deceleration.
- Understand the meaning of horizontal and sloping sections.
- Use acceleration = change in velocity / time. [Supplement]
- Calculate acceleration, treating a deceleration as a negative acceleration. [Supplement]
- Determine the acceleration from the gradient of a speed–time graph. [Supplement]
- Determine distance travelled from the area under a speed–time graph.
- Tell from the shape of a speed–time graph whether an object's acceleration is constant or changing. [Supplement]
Interpreting speed–time graphs
A speed–time graph looks similar to a distance–time graph and means something completely different, which is why they are so often confused. Here the height of the line is the speed itself. A horizontal line no longer means stationary — it means constant speed, which might be very fast.
An object is only stationary when the line sits on the time axis at zero. A line sloping up means the speed is increasing, so the object is accelerating; a line sloping down means the speed is decreasing, so it is decelerating. The steeper the slope, the faster the speed is changing.
Two facts hang off this graph, and keeping them apart is most of the skill: the slope tells you how the speed is changing, and the area underneath gives the distance travelled. Height is speed, slope is the change in speed, area is distance — none of them is interchangeable.
Worth remembering
- On a speed–time graph: height = speed, area = distance.
- Sloping up = accelerating; sloping down = decelerating.
- Horizontal line = constant speed (not stationary). On the axis at zero = stationary.
Acceleration
Acceleration is the change in velocity per unit time: a = Δv ÷ Δt, where Δv is the change in velocity and Δt is the time the change took. If u is the initial velocity and v the final velocity, Δv = v − u, so the same equation is often written a = (v − u) ÷ t. Its unit is metres per second per second, written m/s², because you are dividing a speed in m/s by a time in s.
A car going from rest to 12 m/s in 4 s has an acceleration of (12 − 0) ÷ 4 = 3 m/s², meaning it gains 3 m/s of speed every second. On the graph, that is the gradient of the sloping line: the rise (the change in speed) divided by the run (the time taken).
A deceleration is simply a negative acceleration, and you use it that way in calculations. A cyclist slowing from 10 m/s to 4 m/s in 3 s has Δv = 4 − 10 = −6 m/s, so a = −6 ÷ 3 = −2 m/s²; the minus sign says the speed is falling by 2 m/s every second. On the graph the line slopes downwards and the gradient comes out negative. Do not confuse a negative acceleration with a negative velocity: the cyclist is still moving forwards, so the velocity is positive while the acceleration is negative.
- a = Δv ÷ Δt
- Acceleration is the change in velocity divided by the time the change took.Δv change in velocity in m/s, Δt in s, a in m/s²
Worth remembering
- a = Δv ÷ Δt, measured in m/s². Acceleration = gradient of a speed–time graph.
- Deceleration = negative acceleration: final speed − initial speed comes out negative.
Distance from a speed–time graph
The area between the line and the time axis is the distance travelled. You can see why with the simplest case: an object at a constant 8 m/s for 5 s draws a rectangle of height 8 and width 5, and its area, 40, is the distance in metres — which is just speed × time.
When the speed changes, split the shape into rectangles and triangles, work out each area, and add them. A triangle is ½ × base × height. A car travelling at 8 m/s for 5 s and then braking uniformly to rest over the next 4 s covers 8 × 5 = 40 m in the rectangle and ½ × 4 × 8 = 16 m in the triangle, so 56 m altogether.
For a curved graph the area cannot be split exactly, so estimate it by counting squares on the grid: work out what distance one square represents, count the whole squares, and add a sensible allowance for the part-squares along the edge.
Worth remembering
- Distance = area under a speed–time graph.
- Rectangle = base × height; triangle = ½ × base × height; curve = count squares.
Changing acceleration
The shape of the line tells you whether the acceleration itself is steady. A straight sloping line has the same gradient everywhere, so the speed changes by the same amount every second: the acceleration is constant. A curved line has a gradient that keeps changing, so the acceleration is changing.
Read the curve by watching its steepness. If the line curves upwards and gets steeper, the speed is increasing by more each second, so the acceleration is increasing. If it rises but flattens out, the speed is still increasing but by less each second, so the acceleration is decreasing. A car pulling away and approaching its top speed, or a skydiver nearing terminal velocity, draws exactly this flattening curve. When the line becomes horizontal, the acceleration has fallen to zero.
You can make the same judgement from a table of readings taken at equal time intervals. Speeds of 0, 4, 8, 12 and 16 m/s at one-second intervals rise by 4 m/s every second, so the acceleration is constant at 4 m/s². Speeds of 0, 6, 10, 12 and 13 m/s rise by 6, then 4, then 2, then 1 m/s, so the object is still speeding up but its acceleration is decreasing.
To find the acceleration at one instant on a curve, draw a tangent to the curve at that time — a straight line that just touches it there — and work out the gradient of the tangent, exactly as you would for a straight section.
Worth remembering
- Straight sloping line = constant acceleration. Curved line = changing acceleration.
- Curve getting steeper = acceleration increasing; flattening = acceleration decreasing.
- Equal time steps: equal rises in speed mean constant acceleration.
- Acceleration at an instant = gradient of the tangent at that point.
Worked example
Speed rises uniformly from 0 to 12 m/s in 4 s: acceleration = 3 m/s²; distance = ½ × 4 × 12 = 24 m.
Motion and its graph
Change a value and watch the readings follow. Open it on the lab stage
Motion and its graph
Speeding up: 2 m/s after 0 s.
- Speed
- 2 m/s
- 2 m/s + 1 m/s² × 0 s
- Distance
- 0 m
- 2 m/s × 0 s
- Acceleration
- 1 m/s²
Goal
Find what the gradient of a speed–time graph and the area under it tell you about how a trolley moves.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. Play the run to see it happen. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 2
- Make the trolley slow down and stop before the run ends., not yet
- Travel 100 m in the 10 s at a steady speed., not yet
- Pause halfway and check that the shaded area matches the distance travelled.
acceleration = gradient of the speed–time graph; distance = area under it
(12 − 2) m/s ÷ 10 s = 1 m/s²; ½ × (2 + 12) m/s × 10 s = 70 m
Speed / m/s
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
Straight-line motion with a steady acceleration, on a track 250 m long. A trolley that slows to rest stays at rest rather than reversing.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Rectangle = 40 m; triangle = ½ × 4 × 8 = 16 m. Total = 56 m.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.