Motion · Cambridge syllabus 1.2 · Lesson 4 of 4
Free Fall and Terminal Velocity
Includes Supplement objectivesWeight acts downward throughout a fall. Drag grows as the object speeds up. Initially weight exceeds drag, so speed increases. At terminal velocity the forces balance and acceleration is zero, although the object continues moving.
By the end, you can
- State that the acceleration of free fall near the Earth's surface is approximately constant, at about 9.8 m/s².
- Describe how air resistance affects the motion of a falling object. [Supplement]
- Use acceleration = change in velocity ÷ time for an object in free fall, with g = 9.8 m/s². [Supplement]
- Explain how drag increases with speed. [Supplement]
- Explain how resultant force becomes zero at terminal velocity. [Supplement]
- Interpret a velocity–time graph for a falling object. [Supplement]
Falling objects
Near the Earth’s surface, everything falls with the same acceleration if air resistance can be ignored. This acceleration of free fall is written g, it is approximately constant close to the surface, and its value is about 9.8 m/s². It does not depend on mass. A hammer and a feather dropped together in a vacuum land together, which has been demonstrated on the Moon, where there is no air to interfere.
That sounds wrong at first, because a hammer and a feather clearly do not land together in a classroom. The heavier object has more weight pulling it down, but it also has more mass to get moving, and the two effects cancel exactly. What separates the hammer from the feather in air is not weight but air resistance, which slows the light, broad feather far more than the heavy, compact hammer.
So in free fall — falling with only weight acting — an object gains about 9.8 m/s of downward speed every second. Dropped from rest, after 1 s it is doing 9.8 m/s, after 2 s 19.6 m/s, after 3 s 29.4 m/s, and so on.
Worth remembering
- g ≈ 9.8 m/s² near the Earth’s surface, approximately constant and the same for every mass.
- Free fall = falling with weight as the only force.
- In air, air resistance slows light, broad objects much more than heavy, compact ones.
Terminal velocity
In real air, a second force acts: drag, pushing back against the motion. Drag is not constant — it grows as the object goes faster, and it grows with the object’s area.
Follow a skydiver through the fall. At the instant of jumping the speed is zero, so drag is zero, and the only force is weight: the acceleration is the full g. As the speed builds, drag builds with it, so the resultant force downwards gets smaller, and the acceleration falls. The skydiver is still speeding up, just less sharply each second.
Eventually drag grows until it exactly equals weight. The resultant force is now zero, so by Newton’s first law the acceleration is zero and the speed stops changing. This constant speed is the terminal velocity. Notice what has not happened: gravity has not switched off, and the skydiver has not stopped — the forces have simply come into balance.
Opening a parachute increases the area sharply, so at that same speed the drag is now much larger than the weight. The resultant force points upwards, the skydiver slows down, drag falls as the speed falls, and a new, much lower terminal velocity is reached — one slow enough to land on.
Worth remembering
- Drag increases with speed and with area.
- Terminal velocity: drag = weight, resultant force = 0, so acceleration = 0 and speed is constant.
- A larger area gives a lower terminal velocity.
Worked example
A 2.0 kg object falls with weight 2.0 × 9.8 = 19.6 N. When drag is 9.6 N, resultant force = 10 N downward and acceleration = 10 ÷ 2.0 = 5 m/s².
Approach terminal velocity
Change a value and watch the readings follow. Open it on the lab stage
Approach terminal velocity
Let go from rest: only its weight acts, so it speeds up.
- Speed
- 0 m/s
- Weight
- 9.8 N
- 1 kg × 9.8 N/kg
- Drag
- 0 N
- 1 N s/m × 0 m/s
- Resultant force
- 9.8 N
- 9.8 N − 0 N
- Acceleration
- 9.8 m/s²
- 9.8 N ÷ 1 kg
Goal
Find out why a falling object stops speeding up, and what opening a parachute does to its speed.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. Play the run to see it happen. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 2
- Open a parachute at 5 s: raise the drag coefficient after 5 s to 5 N s/m. Watch the drag arrow as it opens., not yet
- With the same drag all the way down, double the mass. What happens to the terminal velocity?, not yet
- Raise the drag coefficient while the weight stays the same. What happens to the resultant force?
resultant force = weight − drag = mass × acceleration
9.8 N − 0 N = 9.8 N = 1 kg × 9.8 m/s²
Speed / m/s
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
Linear drag F = kv is a teaching approximation; many real falls have roughly quadratic drag, under which doubling the mass raises the terminal velocity about 1.4 times, not twice. The drag coefficient changes at 5 s, all at once, as a parachute opening. The drawing fits the whole 10 s fall to the stage; the force arrows share one scale.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
The larger area increases drag at a given speed. Drag exceeds weight initially and the person slows until drag balances weight at a lower speed.
Check your method, units and explanation against it.
Marked practice
Set 1 of 4 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.