General Wave Properties · Cambridge syllabus 3.1 · Lesson 1 of 4
Wave Motion
A wave transfers energy through a travelling disturbance. In a mechanical wave, particles oscillate around their positions; they do not travel along with the wave over large distances. A wavefront joins points at the same stage of vibration.
By the end, you can
- Understand waves as mechanisms for transferring energy.
- Distinguish energy transfer from bulk transfer of matter.
- Identify wavefronts.
- Describe wave motion using vibrations in ropes and springs and water waves in a ripple tank.
Wave basics
A wave transfers energy from one place to another without transferring matter. That second half is the part to hold onto: when a wave travels across a pond, the water does not travel with it. A floating leaf bobs up and down as the wave passes and stays roughly where it was.
What moves along is the disturbance, and the energy it carries. Each particle in the medium is disturbed by its neighbour, passes the disturbance on, and returns to where it started. The particles oscillate about fixed positions; the wave moves through them. A single disturbance is a pulse. Repeat it regularly and you get a continuous wave, with a frequency set by whatever is producing it.
Three simple set-ups show wave motion clearly. Flick one end of a long rope and a hump runs along it, while a ribbon tied to the rope only lifts and drops back to where it was. Push and pull one end of a stretched spring and a pulse of squashed-together coils travels along it, each coil moving a little way back and forth and then returning. In a ripple tank, a shallow tray of water lit from above, a vibrating bar sends water waves across the tank, and a cork floating on the surface just bobs up and down as they pass. In each case the rope, the spring or the water is the medium the wave travels through.
Seen from above, the crests of water waves form lines across the surface. A line joining points that are all at the same stage of their vibration, such as all the points along one crest, is called a wavefront. A dipper touching the water at a single point makes circular wavefronts that spread outwards; a long straight bar makes straight wavefronts. The wave always travels at right angles to its wavefronts, and the distance between neighbouring wavefronts is one wavelength.
Water waves, sound and waves on a rope all need a medium to travel through. Electromagnetic waves do not, which is why light crosses space and sound does not.
Worth remembering
- A wave transfers energy without transferring matter.
- Particles oscillate about fixed positions; only the disturbance travels.
- A wavefront joins points at the same stage of vibration, such as one crest; the wave travels at right angles to it.
- Ropes, springs and ripple tanks all show wave motion: the medium vibrates but stays where it is.
Worked example
A floating marker bobs as water waves pass even though the wave pattern travels across the surface.
Make a wave
Change a value and watch the readings follow. Open it on the lab stage
Make a wave
A wave travels along the light rope at 2 m/s, with its crests 2 m apart.
- Wave speed
- 2 m/s
- Wavelength
- 2 m
- 2 m/s ÷ 1 Hz
- Period
- 1 s
- 1 ÷ 1 Hz
- Crest-to-trough height
- 1 m
- 2 × 0.5 m
Goal
Find out what sets the speed of a wave along a rope, and what changing the frequency does to its wavelength.
Predict, where you are
If Ithe, thewill
Say what you expect before you move anything. Check makes the change for you.
Test, still to come
Change one thing at a time and watch the readings. Play the run to see it happen. The notebook keeps a reading each time you record one.
Explain, still to come
After you check a prediction, this says why it happened.
Try this · 0 of 2
- Follow the marked particle while a crest passes it. Does the particle travel along the rope with the wave?
- Raise the frequency on the light rope from 1 Hz to 2 Hz. What happens to the wavelength, and to the wave speed?, not yet
- Give a wave on the heavy rope a wavelength of 0.5 m., not yet
Source
v = fλ
2 m/s = 1 Hz × 2 m
Particle displacement / m
Investigation notebook · 0 readings
Change one variable at a time and record the results. These readings stay here until you leave this lesson or reset the notebook.
About this model
An ideal transverse wave on a rope long enough that nothing reflects from its far end, with no losses, so the amplitude never decays along it. Both ropes are under the same tension.
Practice
Warm-up · not marked
Check your understanding
Answer in your own words, then compare with the worked answer. Nothing here is saved or scored.
Worked answer
Neighbouring particles pass on the disturbance while each oscillates about an equilibrium position.
Check your method, units and explanation against it.
Marked practice
Set 1 of 5 · easiest first · Checked as you go, with the worked answer. Sign in or create a free account to save your progress.